Model 1032C Enforcer® Metalized Splice Detector™ Technology

IPST/AFPA
CCD Camera
Evaluation Report

MODEL 1032C ENFORCER® METALIZED

SPLICE DETECTOR™ TECHNOLOGY

If you are a current user of our splice detection solutions,

whether you purchased directly with us or by way of OEM (i.e.,

sheeters, slitters, winders, etc.) you are eligible for preferred pricing

on additional units. (Please note the serial number of the unit or units

you have if purchased via OEM).

"Where the Science of Quality Assurance is still an Art!"


TECHNICAL SPECIFICATIONS
Ancillary Systems:	Model 1042AVT Model 1099AVT Model 1280 Model 1290 Model 1122
Defects Types Detected:	Splices
Material Compatibility:	Papers Plastics Films Metallic Materials
Web Thickness:	500 micron thick max
Maximum Web Speed:	2,000 fpm (609.6 m/min)
Relay Alarm Outputs: Dry Output Contact Closures: Current Capacity at 110 VAC: Current Capacity at 220 VAC: Alarm On Period:	2 (Non-inductive) 0.1 Amp 0.05 Amp 1 Second
Electronic Alarm Output: Pulse Outputs: Voltage: Direction: Duration:	1 15 V (± 3 V) Positive Going 10 ms
Sensor Dimensions:	6.0" X 11.63" X 4.5" (15.24 cm X 29.53 cm x 15.24 cm)
Sensor Weight:	11.5 lbs 5.22 kilogram
Ambient Temperature:	40 to 160° F (4 to 70° C)
Power:	110/220/240 VAC 50/60 Hz Single Phase
Specifications are subject to change without notice. Note: If you web speed is less than 30 fpm, specialized circuitry may have to be applied. If you purchase this unit and it is found that specialized circuitry is required due to misinformation, all monies applicable will be charged, then applied as a credit for replacement of this standard unit with a specialized unit. Additional fees may be applied.

Prevent Costly Repair:

The Model 1032C Enforcer™ Splice Detector™ will help your company prevent costly repairs to rolls, dies, and sensitive production equipment used in web conversion manufacturing processes. This patent pending resistive based technology is designed to detect sudden changes in material thickness due to splices in metalized webs of material such as foil, holographic, food packaging, etc.

Ensure Product Quality:

Our Splice Detectors have been successfully applied to ensure delivered product quality in many different types of applications on equipment such as:

	Sheeters
	Coaters
	Supercalenders
	Extrusion Laminators
	Web Presses
	Slitters
	Rewinders
	Paper Machinery

Monitor Sensitive Metalized Webs:

Our Splice Detector monitors a single web of metalized material to a total thickness of 500 micron on-line for the detection of splices. It automatically adjusts itself to changes in product run thickness, type or caliper of material being monitored. Special splice markings are not required.

Benefits:

Each Black Mamba system installed provides the end users, as well as the web press manufacturer the following:

	100% Reliability in splice fault detection.
	Fail safe to notify the press that the Black Mamba is connected and functioning.
	Limits emergency down time caused by damaged print heads/stations.
	Eliminates the need for "SPLICE FREE PAPER" to be required.
	Reduces print head/station replacements.
	Increases product quality of both press and printed material.
	Facilitates increased market share thus increase annual revenues.

Reduce Setup:

Time Designed for center of web mounting, the Splice Detector eliminates the need for repositioning to accommodate changes in web width. It can be installed at any convenient position in the web's path to provide defect detection at the earliest possible stage of the process.

Achieve Unattended Operation:

Both a signal contact closure and a signal digital pulse output are included with each Splice Detector for control or activation of audio/visual alarms, counters, sorters, and other types of processing equipment. The unit can also be combined with our Multicolor Edge Marking™ Technology or Reject Gate Control™ Technology for completely unattended operation of your production equipment.

Expect Reliability:

The Splice Detector has been designed for operation under real world conditions found in high speed metalized lamination processes. It's performance has been proven over time in installations throughout the world. Expect stable and reliable operation of our Splice Detector in your production operations.

CONTACT R.K.B. TODAY:

Call us today @ 1-315-455-6636 to discuss your complete machine vision imaging application and to learn more about the industry's most diverse line of machine vision web inspection, hole detection, splice detection and control products.

[ Top of Page ]